A hose should connect the cleaner to the skimmer pump to suck the water.
This option also gives the additional bonus of reducing debris load on your filtration system.
Robotic cleanersare the freshest solution forpool maintenance.
As automatic cleaners, they work per program, but they are fully autonomous and require only electricity.
They also have their own bag for garbage and the pools water circulation system.
The whole cleaning circle for an average pool is several hours.
For sure, after each use, the robotic cleaner should be cleaned.
The size directly impacts the required capacity of the cleaner.
The bigger the pool is, the more power (battery or electricity) is required to clean it.
The suction power is defined by the key in of drive and the number of vacuum jets.
The size of the pool also includes the bang out of the pools surface.
So, it is essential to check the cleaner beforehand based on the specific geometrical parameters of your pool.
Do not forget to add height and depth for above-ground pools when you calculate the hose length.
There are hoses with adjustable length on the market, such hose sections can be connected together.
Such a solution is good as only a section could be changed in case of repair.
The hoses diameter impacts suction function; the smaller the more suction power will be.
Below are listed other important ones after the size of the pool.
Additionally, most of the cleaners are specified at least per pool model above ground or inground.
Above-ground cleaners require less power and are more accessible in maintenance.
Inground cleaners are correspondingly more expensive.
For sure, there are universal cleaners for both of these types.
Only soft brushes should be chosen for the fiberglass pool; for other surfaces rubber brusher is fine.
It is also important to estimate its quantity; a simple cleaner could not suck a lot of leaves.
All hoses should have enough length to reach all the swimming pool corners.
Spare details could be costly, so it is important to take these expenses into account.
A good warranty helps to reduce the costs of maintenance.
It is unfortunate to buy a cleaner and cannot organize its excellent work.
Some owners also consider the cleaners appearance, style, color, and other details.
On the market, almost all wishes like that can be fulfilled.
FAQs
Is a suction or pressure pool cleaner better?
Suction cleaners are usually less expensive than pressure cleaners and are easy to install and maintain.
So, which jot down of cleaner is better?
It really depends on your needs and budget.
What is the difference between a pressure pool cleaner and a robotic pool cleaner?
Which is the suction side of a pool pump?
It is the side that draws in water from the pool.
The suction side of a pool pump is usually located at the bottom of the pool.
What is the pressure side of a pool pump?
The pressure side is under more pressure than the suction side, so it needs to be stronger.
The pressure side usually has a higher flow rate than the suction side.
Conclusion
Water cleanness is the most critical issue for all owners of swimming pools.
Diseases such as diarrhea and gastroenteritis are usual risks if the poll is not correctly maintained.
The maintenance includes mechanic and chemical treatment availability of the filtration system.
Mechanical treatment is performed by different pool cleaners manual, automatic, or robotic.
Chemical treatment can be chlorine, bromine, ozone, or UV.
The periodicity of chemical treatment depends on the quality of the pool cleaner.
So, it is essential to choose it correctly.
To minimize risks of any diseases, a shower before and after is good advice for all swimmers.
