In todays world,a toiletis no longer just a convenience.
Instead, its a must-have in any home.
It can also be as complex as damaged sewer lines.
Keep reading to learn more about what causes toilets to clog and tips for fixing them.
This may cause the drain line to clog when you attempt to flush toilet paper or regular flushable wastes.
Among the objects that would cause a drain to clog is hair, foreign objects, or paper.
A blockage would occur when these clogs exit your toilet bowl and become trapped in the drains.
Clogged drains can cause significant drainage problems throughout your entire home.
These clogs are often difficult to clear.
What to do:
If your house is old that would mean that your drain is fragile.
You will, therefore, need anearest drain cleaning serviceor a plumber to replace the whole system.
They include:
If your toilet bowl has flooded, you first need to remove the water manually.
you’re able to then plunge without splashing the wastewater.
The next step is to gently plunge the toilet bowl while letting our air from inside the plunger.
If you do not have a plunger, you should use soap and hot water to dissolve the clog.
Add a shampoo and some slivers of bar soap followed by a gallon of hot water.
You should then wait for 20 minutes to allow the clog to break then flush the toilet.
you might transform a coat hanger into a makeshift snake drain and use it to dislodge the blockage.
To use the hanger, you oughta first unravel and straighten it.
double-check you wear a pair of gloves to protect your skin while unraveling this wire.
Use the makeshift drain to push the debris down the drain to enable you to flush.
Extreme temperatures andcorroded pipes canalso make the sewer line susceptible to cracks and leaks.
When the main sewer line is compressed or punctured, the municipal sewer system and septic tank are constricted.
Depending on the magnitude of the damage, a plumber will either perform pipe lining or replacement.
For minimal damage, a plumber will conductpipe liningwith epoxy to harden the leak area.
However, extensive damage will require conventional sewer line replacement.
This approach will ensure that other blockage materials never interfere with your plumbing system.
Some of the strategies that you could adopt include:
The plunger/piston ballcock gets its name from its shape.
Its made up of a brass rod connected to a piston or plunger.
While you do this, you should ensure that the water level falls below the tanks overflow tube.
Like the plunger/piston ballcock, a brass diaphragm ballcock uses a diaphragm to control the water level.
you could adjust the float cup and change the level of the water by pinching the metal spring clip.
This approach will allow you to raise and lower the water level as needed.
Unlike the float-cup fill valve, the internal float fill valve is normally hidden inside the tank.
This fixture uses a pressure-sensing mechanism to determine the level of the water in the tank.
It stems from the ground and winds into the toilet bowl.
This pipe ensures that foul-smelling sewer gases do not pass through your toilet bowl to your home.
New toilet designs lack this pipe but have a P-trap instead.
A partially clogged S-trap or P-trap can be hard to detect.
But when completely clogged, it causes your toilet to block instantly.
Often, plunging is effective to clear most of the clogs.
It is the first method that you should consider to fix this problem.
This unit has a bell-shaped cup with an extendable flange that fits inside the toilet bowl.
A toilet auger works just like a drain snake.
Consequently, you better empty your overflowing toiled first to avoid creating a mess while using the auger.
Emergency plumbers often come to your aid in a matter of minutes and will resolve your problem instantly.
5.Wrong/too much toilet paper!
Toilet tissue paper is supposed to dissolve immediately it gets into contact with water.
Not all brands will dissolve properly, however.
Some toilet papers are as strong as a newspaper print and when used they instantly clog your toilet.
Toilet paper comes in 1,2 and 3-ply versions.
Of all of these options, the 2-ply is a great option.
The 2-ply tissue paper is both soft and less bulky.
The toilet paper is convenient for use in your toilet.
You could also put up a family cloth in the bathroom for cleaning up after use.
Reusable toilet cloths may seem unconventional, but they will store your toilet from occasional clogging.
In recent years, flushable wipes have become popular among people.
Numerous companies are currently manufacturing these easy to dissolve wipes that will ensure that your toilet doesnt block.
Related:20+ Toilet Paper Holder Ideas
6.Hard water
You should know thathard water is full of minerals.
These minerals include calcium and magnesium.
They usually get deposited inside your drain pipes over time, creating a clog.
This problem is exacerbated if your toilet is old and has a poor flusher.
Hard water mainly comes from the wells and mostly affects people living in rural parameters.
Also, if you use too chlorinated water, you are building plaque on your toilet.
The reason is that chlorine damages the plastic and rubber parts of your toilet.
It causes them to break after some time.
Over time, parts of your broken pipes will build up along your plumbing system creating a serious blockage.
Instead of using hard-well water, you should consider investing in a water softener to get rid of minerals.
A water softener is a house filtration system that will remove calcium and magnesium through an ion-exchange method.
it’s possible for you to buy the system at a local store.
you could then have it installed in your house.
7.Obstructed plumbing vents
Your plumbing system relies on ventilation pipes to release sewer gases from your home.
In their absence, you would have gas building up in your drain pipes.
The sewer gas build-up will certainly contaminate the air in your home.
The vents also allow clean air into your home by creating suction and pressure within your plumbing lines.
It is this pressure that also enhances your toilets flushing power.
The person in the house should flush the toilet while you hold your hand over the vent.
If your experience no suction from the vent, that confirms that your vent is blocked at the outlet.
you might also use a plumbers snake to unclog what might be blocking your vent.
In such scenarios, you oughta call in a plumbing contractor to demolish and reposition your vent properly.
The reason is that multiple-story buildings have complex vet systems and should be left to a professional plumber.
Final Thoughts
Toilet clogs are horrifying, messy, and frustrating.
The causes of toilets clogs could be simple issues, such as hair or toilet build-up.
They could also be complex problems that touch on the main sewer lines.
These signs could be indications of a much bigger problem within your entire plumbing system.
When overlooked, a toilet clog can become too expensive to fix.
It can also contaminate your home when there is an overflow.
The outcome is a disease outbreak.
It is good to have a plumber on call to avoid emergencies that would render your home inhabitable.
Currently, you’re able to find emergency plumbing companies in almost all the towns.
Thus, you should not let your toilet embarrass you!
