GE dryers are efficient and reliable.
Long drying times are to be expected when you have dryer heating issues.
Besides, an overloaded dryer will cause the drum to make a lot of noise.
you’re free to check your owners manual to find out the exact capacity of your GE dryer.
Here are some of the possible reasons your GE dryer is not heating and not drying your laundry.
A clogged vent means moist air cannot exit your dryer and cause your laundry to remain wet.
The vent of your GE dryer is at the back of the unit.
The vent is used to deal with moisture formed during the drying cycle.
This will allow dust and moisture to build up in the folds.
If this is the case, confirm the vent is not compressed or is clear behind the dryer.
verify, too, the dryer is not pushed too far that will cause the crimping of the vent.
Better yet, double-check, if possible, that the vent is less than 20 feet.
2.Faulty Cycling Thermostat
The cycling thermostat is responsible for monitoring the internal pressure of the dryer.
Running a faulty cycling thermostat can cause low heat or not allow the dryer to heat.
In certain circumstances, it may cause your dryer to overheat.
The lint screen also ejects moist air due to wet clothes drying.
Check your owners manual to know where the lint screen is on your dryer.
GE dryers come with two heating elements.
you could test the heating elements with a multimeter.
Check your users manual because it is not easy to jump into the heating elements of your dryer.
Replace the defective heating element and re-test it using your multimeter before re-assembling your dryer.
Do a test cycle to endure everything is working well.
5.Broken High-Limit Thermostat
The high-limit thermostat of your GE dryer is a safety feature.
This may also probably be brought on by a clogged dryer vent.
A malfunctioning or broken high-limit thermostat may turn off the burner even if your dryer is not overheating.
So, it is best to check all the components of your dryer that commonly get defective.
Check the high-limit thermostat with a multimeter for continuity.
Replace the high-limit thermostat if it does not show continuity.
To check the high-limit thermostat:
The high-limit thermostat is the big thermostat that has two wires.
It can typically be found outside the heater can.
The thermal fuse can be found at the heat source of the dryer.
It will shut the heat off when it gets too hot.
If you have a gas-powered dryer, not properly maintaining the heat source can cause a fire.
Defective fuses show that the vents of your dryer need some air before mold develops and causes a fire.
You may also need to clean the entire dryer.
If no continuous electrical path is established, replace the wires in the section and reconnect them.
7.Problem with Incoming Power
Incoming power is another reason your GE dryer is not heating.
To operate correctly your GE dryer needs two legs of 120 volts or a total of 240 volts.
Your GE dryer should have a dedicated 240-volt electrical outlet.
If this is the case, you should check the circuit breaker with a multimeter to measure the voltage.
Here is what you might do.
you’ve got the option to also check on the power cord of your dryer.
A broken, burned, or loose connection may cause yourGE dryer not heating.
If you have a gas-powered dryer, you will need to check its gas valve solenoid.
The gas valve of your dryer has one or two solenoids or coils.
The solenoids open and kill the valve to manage the flow of gas.
This is how to check the solenoids of your dryer.
The gas valve solenoid functions to turn the gas on and off.
It is responsible for maintaining a constant flame that runs your gas-powered GE dryer.
Related:
Conclusion
You use your dryer several times a week.
you could look into each of the reasons yourge dryer not heatingand follow the recommended fixes.
It may sometimes require you to take the dryer apart and reassemble it.
