Plain and simple walls do not necessarily mean that they should look uninspired and without texture.
Wall textures are important in stylistically concealing wall impurities, cracks, and other imperfections.
It follows more skillful processes that must not be skipped.
It also involves repeated fine-tuning for the splatter effect to be established.
2.Comb
This is considered the most aesthetically valuable wall texture making it a favorite of interior designers.
It creates a more stylish effect for the wall, producing beautiful waves and rainbow lines along the walls.
It is easy to make too.
With its thickness, it is functional in lessening noise in concealing unevenness in ceilings and walls.
Aside from this, it brings out a 1970s look in your home.
Nonetheless, It is easy to apply as it only requires a texture sprayer and a compressor.
4.Slap brush
For this, you will need a panda paw or a stomp brush.
This is functional for walls with very visible defects making it a popular wall texture for bathrooms.
The slap brush bang out is achieved by smoothly layering the drywall over the wall surface.
5.Santa Fe
This is the trendiest wall texture of 2019 according to Home Depot.
The Santa Fe is unique for its two-layered drywall with one layer smoother in texture than the other.
After applying the wall texture substance, immediately build patterns out of a large drywall knife.
The Santa Fe wall texture is also perfect for contemporary home designs that are majorly into neutral colors.
It is finer and requires a more consistent tool compared to the splatter pop in.
To do this, apply primer on the drywall and then spray the wall texture substance.
After it dries, immediately apply two coats of primer again.
However, confirm that the wall texture paint is not that hard before spraying it.
The name comes from the two tools that are used to achieve it.
This design is generated by rolling layers of wall texture substance against each other.
Adding in wall lights in the bedroom gives a full effect of the hawk and trowel jot down.
Its deliberate uneven look helps in concealing other impurities.
It is best for exterior walls, mudrooms, and the garage.
9.Sand swirl
This one is the combination of sand spray and comb technique.
For this to happen, you must use a thick bristle brush to make the swirls.
It can be rainbow shaped, swirled in a row or in a neat symmetry.
The swirls can be combed before the mud hardens or it can also be swirled like paint.
It produces a bumpier texture which makes it good for the homes exterior walls or in kids bedrooms.
It involves the combination of various texturing techniques, making the process harder to master.
Nonetheless, if you get the right technique, expect a more dramatic effect on your walls.
True to its name, the surface is stomped with rosebud patterns complete with petals and a center bud.
The more conventional way, however, is to spray the mixture in a circular pattern over and over.
For this to happen, you must employ the knockdown technique but in a very even pattern.
After which gently stomp the surface with a rosebud stamp.
11.Crows feet
This one resembles the slap brush texture.
It is done by applying wet mud to the drywall.
For this, you will need a stiff bristle brush or a paint roller.
Repeat the process several times until you might create unique patterns.
This throw in is a little messy to apply so double-check that the furniture and the floors are covered.
Applying the muddy substance must also be quick because the mixture is vulnerable to dust settling.
It is the best wall texture pop in for the living room and study rooms.
It goes well in kitchens, dining rooms, and living rooms.
Smoothen the surrounding surface with a trowel for a more knockdown effect.
13.Stomp knockdown
As the term implies, this is a variant of the knockdown pop in.
As such, you might achieve this by doing the same steps that we have previously mentioned.
And the mud is directly applied to the drywall.
For knockdown types, compound mud is the most versatile material to use.
The plaster mixture is then applied thinly on the walls.
After which, the surface is buffed and sanded to attain its polished look.
Since it requires a second coating of the plaster, double-check that the surface is dry enough.
Usually, it takes 5-6 hours before it could dry enough to be coated again.
The mixture is composed of primer, water, and a bag of sand.
It is left overnight before it is applied to the wall.
you could count on this wall texture to last very long and a surface that will not crack.
For these, here are some FAQs about wall texturing that you should know.
What is wall texture?
A wall texture is thinner than drywall but thicker than paint.
This substance is usually used with walls and ceilings creating dynamics through small shadows and bumps.
Wall textures still need primers before they are applied.
How much does it cost to have walls textured?
There are three considerations that will project how much you should expect for the wall texture budget.
The first one is the existing condition of the walls.
The second one is the size of the room and the third is your choice of texturing technique.
Wall texturing costs from $1-3 per square foot.
What is the point of textured walls?
Wall textures are a perfect choice to conceal drywall seams, dents, cracks, and other wall imperfections.
The color palette and general pigment of wall texturing compounds are also significantly different from wall paints.
This is the reason why wall textures have a different tonal effect, especially for neutral colors.
As such, wall textures have become staple options for home renovations and other construction projects.
Does drywall need texture?
Related:Alternatives to drywall
Why are walls in California textured?
Textured walls were popular in the US in the 1970s.
Conclusion
To conclude, wall texturing is a good investment for home improvement.
With all things considered, a wall texture is a good call.
Related:
Related Posts
