Is the temperature of your leftovers lukewarm?
Is it possible that your milk becomes sour in a matter of hours?
You should check the temperature in your refrigerator.
Its likely that its not cooling as efficiently as it should.
But why is it suddenly malfunctioning?
Is your refrigerator getting too hot to handle?
Its upsetting to find your Whirlpool refrigerator isnt working properly.
When your refrigerator breaks down, it usually affects the entire appliance.
It can be perplexing when your Whirlpool refrigerator freezer is chilly but the refrigerator is warm.
And how to fix
The last thing you need is a non-cooling Whirlpool refrigerator.
What could possibly cause a Whirlpool refrigerator to stop functioning?
Continue reading to find out why your Whirlpool refrigerator isnt chilling and how to fix it.
There are various solutions for a Whirlpool refrigerator that isnt cooling well or at all.
Since the refrigerant travels through the condenser coils, heat is dissipated.
The coils will not be able to successfully release heat if it is blocked with dust and the likes.
Without enough air circulation, the refrigerator will not be able to keep its inside cool.
Check the temperature tweaks first if your refrigerator isnt cooling properly.
To best preserve food, set the temperature of your Whirlpool refrigerator to 37F and the freezer to 0F.
Your refrigerators owners manual may have particular suggestions for your model.
Place a refrigerator thermometer inside the fridge if the temperature is adjusted correctly but it still feels warm.
Lower the temperature till the thermometer registers 37F if it registers higher than what the refrigerator reports.
Release the screws and detach the cover plate that secures the ascending bracket connected to the wall.
Reattaching the bracket to the wall requires slipping a piece of paper beneath the bracket.
This allows the door to swing smoothly while keeping the condenser coil of the refrigerator from accumulating moisture.
There are several reasons why a condenser fan may stop spinning.
First, test whether the blade is free of debris and dirt.
If necessary, remove adhering with a towel.
Also, checking the motor of the refrigerator is important.
Because if it is damaged, it may need a new one to get it working again.
Based on the thermistor readings, the control board adjusts power to the compressor.
The compressor and evaporator fan may not run as needed if the thermistor is malfunctioning.
As a result, the refrigerator will not be cold enough.
Test the thermistor with a multimeter to see whether its defective.
The resistance of the thermistor should change in tandem with the temperature of the refrigerator.
If the resistance does not vary or the thermistor does not have continuity, replace it.
Its possible that if it isnt working properly, the coolant system wont run.
It is unlikely that the thermostat is malfunctioning if it does.
If you dont hear a click, use a multimeter to check the thermostat for continuity.
Replace the temperature control thermostat if nothing happens at any setting.
This will prevent the refrigerator from getting to its optimum temperature.
9.Faulty Door Seals
A fridge that wont stay cold is frequently because of faulty door seals.
Examine the door seal to see if any pieces are loose or have already failed.
If the seal has any flaws, the cold temperature will be able to pass through them.
This is, however, a rare occurrence.
Check all of the more typically defective parts before replacing the compressor.
Check the compressor after youve made sure all of the other components are in good operating order.
Using a multimeter, check for continuity between the electrical pins on the compressors side.
The compressor is most likely malfunctioning if there is an open circuit.
A licensed technician must replace the compressor if it is malfunctioning.
If this is the case, the repair will most likely be a simple do-it-yourself project.
The start relay is a small machine attached to the compressors side.
TheStart Capacitoris another component that could have failed.
The start capacitor acts nearly like a battery, giving the compressor a small boost during power up.
If this is the case, the start capacitor is the next most likely component to fail.
Compressor components for refrigerators can also be bought online at very low prices.
Powered by this motor is the fan which gusts cold air over the refrigerator coils.
The refrigerant cannot achieve optimal temperature without this fan.
Another reason might be thefailure of the unfreeze system.
The defrost function will not work if it fails.
The temperature of the evaporator coils is monitored by the Defrost Thermostat.
If its broken, the refrigerator wont defrost as quickly as it should.
Dirt accumulates on the wires as a result of continuous functioning without sufficient cleaning.
If your refrigerator is becoming noisier, it could be a sign that the coils have become clogged.
Another reason might be apower outage.
One of the most critical components of every electrical equipment is the power cord.
In this instance, your Whirlpool refrigerator is not an exception.
Solution:
To begin, double-check that the plug is properly seated in the socket.
The voltage is degraded by a faulty power connection.
Theres a potential the cord will get tangled up at some point.
Examine the power cable thoroughly and tape the scarred area.
We recommend that you replace the cord (for a guaranteed solution).
Check to see whether your fuse has blown.
Power distortion could be due to an issue with your circuit breaker.
When turning on the refrigerator, each model will behave differently.
If the refrigerator still wont turn on, see to it its hooked into a GFCI power outlet.
During the power outage, the outlet may have tripped.
If the fridge still wont start, look for damage to the cord and plug.
If this is the case, the temperature may take several hours to return to normal.
Similarly, if the refrigerator is brand new, it may take up to 24 hours to chill entirely.
Some refrigerators feature acooling setting that must be activated in order for the fridge to cooldown.
Check to see if it was accidently turned off.
You mustprovide enough ventilation between the freezer and refrigerator sectionsto maintain the optimum temperature.
Cool air from the freezer enters and exits the refrigerator compartment through vents in both the refrigerator and freezer.
confirm there are no obstructions in the way of these vents, such as food.
Examine the location of your vents.
The condenser fan motor will be running if the compressor is functioning.
Check to see if the condenser coils are clean and that airflow is not restricted over them.
Place your palm on top of the compressor and feel for vibrations to see if its running.
Compressors typically operate at a warm to very warm temperature.
A hot or very hot compressor might signal a problem.
Its usually a malfunctioning capacitor or relay that causes a refrigerator to make clicking noises and not cool.
At the very least, knowing what the problem is will save him time in locating it.
FAQson Whirlpool refrigerator not cooling
How do I reset my Whirlpool refrigerator not cooling?
A list of troubleshooting recommendations from Whirlpool refrigerator control board might assist you in resolving typical appliance issues.
Look to find the door switches by opening the door of the refrigerator.
Where is the reset button on a Whirlpool refrigerator?
Pressing the temperature button of the fridge will get the service moved.
After all that effort, it is back in working order if you see that the display shows nothing.
Related:
Conclusion
Modern refrigerators are not just for keeping perishables as fresh as possible.
They also serve as a free-flowing water source as well as a continuous ice-making machine.
The refrigerator may just need to be reset if it is beeping or showing signs of malfunction.
Theres no need to throw out or consume all of the cold food before it spoils.
Instead, try one of these fast solutions to get your refrigerator back in working order.
If these simple fixes dont work, its time to bring in the professionals.
Always refer to your refrigerators owners manual for advice on how to properly care for it.
